SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK

This blog will show a tested success case: for 2013 Range Rover Evoque with only one working remote key, you can program new remote key by using SKP900 key programmer about 3 minutes!

Below are operating steps:

Connect SKP-900 with car via OBD port then power up SKP-900.

Choose function “IMMOBILIZER”

Choose car brand “LAND ROVER”

Select year “2012-2013” then “RANGE ROVER (2012-)”

Select model “EVOQUE (2012-)”

Wait it is loading…

Choose “IMMOBILIZER SYSTEM” and press car start button to turn on ignition.

Choose “ADD KEYLESS TYPE 1” it needs at least one registered keyless.

Put the registered keyless close to car gear shift then turn ignition off.

SKP-900 key programmer will turn car ignition on, press YES button.

Now car key number is 3.

In 5 seconds quickly press the new key Unlock button.

Now car key number detected is 4.

Again quickly press the new key Unlock button in 5 seconds.

ADAPT SUCCESS!

SuperOBD SKP900 successfully programs a new key for 2013 Range Rover Evoque! New key is working!

Save