VXSCAN OBD Version Lexia3 PP2000 Diagbox V7.83 Firmware 921815C Lexia 3 OBDII Diagnostic Tool

Latest VXSCAN Lexia3 OBD Version PP2000 Diagbox V7.83 Firmware 921815C Lexia 3 OBDII Diagnostic Tool

Top 5 Reasons to Get Lexia-3:

1. Support multi-language: English/ German/ French/ Japanese/ Russian/ Spanish/ Portuguese/ Swedish/ Turkish/ Dutch/ Polish/ Italian/ Hungary/ Greek/ Czech

2. It works for both Citroen and Peugeot. Now support Peugeot 307!

3. Lexia-3 PCB edge is golden with original full chips. Double PCB has 7pcs optocouplers, which are 100% original and new.

4. lexia-3 relays are 12pcs, which are 4.5V, it is more stable.

5. PP2000 have 2pcs Optocouplers

Compatible Vehicles:

It compatible with Citroen cars including, C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on.

It compatible with most Peugeot cars from 1995.

Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Supported Car Models:

C-Zero/ C1/ C2/ C3/ C3 PICASSO/ DS3/ C-ELYSEE/ C4/ C4 CACTUS/ C4 PICASSO/ DS4/ DS 5LS/ C5/ DS5 /C6 / C8/ C-CROSSER/ C4 AIRCROSS/ NEMO/ BERLINGO/ JUMPY/ JUMPER/ AX/ SAXO/ BX/ ZX/ XSARA/ XANTIA/ XM/ EVASION/ C15/ FUKANGFUKANG 988/ ELYSEE/ C-ELYSEE(R3)/ C-TRIOMPHE/ C-QUATRE

iON/ 107/ 108 /206 207/ 207+/ 208/ 301/ HOGGAR/ 307/ 308/ RCZ/ 407/ 408/ 508/ 607/ 807/ 1007/ 2008/ 3008/ 4007/ 4008/ 5008/ BIPPER/ PARTNER/ EXPERT/ 106/ 205/ 306/ 309/ 405/ 406/ 605/ 806

Hardware and software requirements:

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.

Note: Please setup the software according to the requirements of hardware and software. Otherwise it will fail to setup and bring you much trouble.

Better to install the software on the computer with Windows XP system.

Better to close the Anti-virus software on your computer. Because the Anti-virus may recognize it as a type of virus, it will clear off all the software on the CD.

Supported functions:

Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

1.Read Identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2. Read Fault Codes

Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").

Program supports report printing or copy to clipboard.

3. Clear Fault Codes

this function clears all stored fault codes and other diagnostic information.

4. Auto-Scan (Complete Car Scan/Test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6. Actuator Test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Supported Languages:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech.

Package Include:

1pc x VXSCAN Lexia-3 OBD Version Main unit
1pc x USB Cable
1pc x CD

more infomation about VXSCAN OBD Version Lexia3 PP2000 Diagbox V7.83 Firmware 921815C Lexia 3 OBDII Diagnostic Tool please go to https://www.chinaobd2.com

Prev: CN-200 CN200 Super Programmer Basic Car Maintenance Diagnosis Scanner

Next: Newest OTC Plus 3 in 1 GTS TIS3 OTC Scanner for Toyota Nissan and Volvo with IT3 V14.00.018 Global Techstream