OBDSTAR X300 DP Plus Clone GM Opel Bosch BCM

This article show a guide on how to use OBDSTAR X300 DP Plus to clone GM Opel Bosch BCM.You can copy the original ECU data,and then write the data into another same ECU hardware via X300 DP Plus,so that it can achieve the same function as the original ECU.Let’s jump right in!

Procedure:

Select “ECU Clone”==>GM

GM V30.01,and tap “OK”

Select “Auto” and tap “OK”

It prompt with the information “This function is available by connecting the server,please ensure the Internet connection is normal”

Tap “OK” to continue

Select “Read EEPROM”,and click “OK”

Enter a filename to save

File saved success

Select “Read FLASH”

Enter a filename to save

Click “Write EEPROM”

Select the data file you saved before

Logging system…

Restoring EEPROM…

Successful data recovery

Select “Write FLASH”

There are certain risks in operating this function.Does it continue?

Remember:During operation,make sure that the vehicle is fully powered and do not disconnect the device.Tap “OK” to continue

Select the FLASH file you saved before,then tap “OK” to continue

Logging system…

Restoring FLASH…

Successful data recovery

Video Guide:



Done!

Src:https://www.chinaobd2.com/wholesale/obdstar-x300-dp-pad2-key-master-plus-full-configuration.html