How to do 2013 Passat All Keys Lost by OBD using VVDI2?

Question: Can we program AKL for 2013 Passat by OBD?

Answer:

Add a new key: Yes

All keys lost: No, you need remove cluster

Also you can do it with vag obd helper and vvdi2

Steps:

Step 1: obdii read login code and part memory data

Step 2: find 7 bytes cs from a working key

Step 3: make a dealer key

Step 4: key larning

vvdi2-passat-obd

Test 1: 2014 VW Passat all keys lost, 10 min done!

vvdi2-vag-obd-passat-all-keys-lost

using VVDI2 and VAG helper

Test 2: Passat 2015 MQB with Kessy, learn a second key

vvdi2-passat-mqb-1 vvdi2-passat-mqb-2 vvdi2-passat-mqb-3 vvdi2-passat-mqb-4

using vvdi2 programmer

Info:

Put the key flat on the reader not in it

That is , When it asks you to put the original key in vvdi2 just put it flat on top

Do same when you’re generating the new key

After you read eeprom and immo data and save, make dealer key and once you have done that add key and I always use the middle selection and follow it from there

Just be careful on adding the key as it’s keyless and if you turn off the ignition at the wrong time or anything else goes wrong dealer tool will be needed

Tip of “the careful”: Just when you get a generated key sorted and go into ADD KEY follow what it says carefully, does also give you warning on vvdi2

Tech support from https://www.chinaobd2.com/

  • Scania VCI-3 VCI3 Scanner
  • X-PROG Box V6.12