Yanhua Mini ACDP clear BMW 8HP ISN and refresh 6HP data

Yanhua mini ACDP adds module 11 to clear BMW 8HP ISN (F /G chassis) and refresh 6HP data (F chassis) without welding.

Youtube Video 1 :How to Use Yanhua ACDP to Reset BMW ISN 8HP EGS



Youtube Video 2: How does Yanhua Mini ACDP refresh 6HP data

Part 1. Yanhua Mini ACDP to refresh 6HP data (Support F chassis)
Step 1. Prepare ACDP, OBP+ICP adapter, EGS interface board and EGS module.

Step 2. Connect the 6HP end of the EGS interface board to the EGS module interface.

Step 3. Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal.

Step 4. Connect the ACDP, OBP+ICP adapter, EGS interface board and EGS module.

Step 5. Go to the ACDP official site http://www.acdpmaster.com/
Download pc software or Android / IOS APP (Turn on Bluetooth and connect wifi.)
Here download PC software, I just download the two parts with red arrow.

Step 6. Select “BMW”, then “EGS Refresh” , then “6HP data refresh (Support F chassis)”.

Step 7. Follow the on-screen guide to operate.

Part 2. Yanhua Mini ACDP to clear 8HP ISN (F /G chassis)

Step 1. Prepare ACDP, OBP+ICP adapter, EGS interface board and EGS module.

Step 2. Connect the 8HP end of the EGS interface board to the EGS module interface.

Step 3. Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal.

Step 4. Connect the ACDP, OBP+ICP adapter, EGS interface board and EGS module.

Connection method 2: Connect ACDP with vehicle OBD-II port.

Connection method 3: Please connect ACDP to EGS interface according to the diagram.

Step 5. Select “BMW”, then “EGS Refresh” , then “8HP ISN clear (Support F /G chassis)”.

Step 6. Follow the on-screen guide to operate.

Enjoy.

www.chinaobd2.com