Toyota Esport H chip IMMO Programming with OBDSTAR X300 Pro3

This blog will show you how does OBDSTAR X300 Pro3 (Key master) program Toyota H chip remote key. Very easy to operate. Enjoy it!

Device:

OBDSTAR X300 PRO3

KD900 Remote Maker

Two keys: original(master) key, new(valet) key

Following the procedure to program

First, make remote with KD900 and insert chip H (47)

Next, begin programming the chip with obdstar x300 key master

Choose IMMOBILIZER -> TOYOTA/LEXUS -> TOYOTA/LEXUS V31.03

X300 Pro3 is loading…

Initializing…

Authorizing…

Then choose “Immobiliser” and press ENT to continue

Type 2 (with G/H)

Add a key

X300 key master will show you the information interface, read it in detail and press ENT

(1 master key is needed to erase or add other key.

How to identify master key and valet key?

Insert key into ignition switch, if immobiliser light isn’t bright, that is master key, if it is bright for 1 sec and then extinguished, that is valet key)

Then insert programmed original key and switch ignition on, press ENTER to continue

Next, insert new key, keep the ignition switch off and wait until security light go off

Light on

Light off

Use the new key start success!

Next, program remote with X300 Pro3

Go back to TOYOTA/LEXUS V31.03 and choose “Remote”

Type 2

Add remote

Then switch ignition on and open the drive door

Press LOCK and UNLOCK button together for 1 sec within 30sec then press LOCK once

Done! Program success!

Try to use the remote, press LOCK button, the door locked

Press UNLOCK button, the door unlocked

It’s working now!