OBDSTAR F108+ read PSA pin codes & program keys OK on Canbus & K-line cars

OBSDTAR F108 update version obdstar f108+ has been rolled out nowadays. And chinaobd2 technicians have been tested to read PSA pin codes and program keys without issues not only on pre-2008 K-line cars but also post-2008 new CAN BUS cars.

Here is the test report of the new OBSDTAR F108+ key programmer.

f108+ version: fw: v4.04 sw: v06.08 (add K-line for pre-2008 cars)

If you have problem about OBDSTAR F108+ Pls read below article :

OBDSTAR F108+  PSA pin codes & programmer  Kline / canbus FAQ

Tested language: English (obdstar f108+ only with English available)

Tested procedures:

(it’s very easy to operate, even for the green hand)

-> connect OBDSTAR F108+ programmer with the car

-> select FUNCTION-> IMMOBILIZER

-> select PEIUGEOT/CITREON/DS V31.09

-> read security code

-> turn on ignition switch, then turn off ignition switch, then turn on ignition switch

-> reading security code…

-> read security code SUCCESS!

Here are some photos taken in the test.

Vehicles tested ok:

Here is the Peugeot, Citroen and DS car list includes all models tested without any issues.

Peugeot 1007   Peugeot 206    Peugeot 207    Peugeot 208     Peugeot 2008

Peugeot 301     Peugeot 306    Peugeot 307    Peugeot 308     Peugeot 3008

Peugeot 406     Peugeot 407    Peugeot 4007  Peugeot 508    Peugeot 5008

Peugeot 607     Peugeot 806    Peugeot 807

Peugeot Bipper    Peugeot Expert     Peugeot Partner

C2  C3    C3 Picasso    C3 Pluriel

C4 Cactus    C4 Picasso

C5    C8    C-Elysee    Xsara Picasso    Berlingo 2

Berlingo 3   Jumper   Jumpy

DS3    DS4   DS5

Note:

models above are the post-2008. Pre-2008 models has been tested.

So OBDSTAR F108+ is verified to work ok on post-2008 models only

Save

Save

Save

Save