How to use Digimaster 3 correct mileage on BMW CAS 2000-2014?

Digimaster 3 mileage correction master is verified able to correct mileage on BMW CAS 2000-2014 year.

Here a table of 2000-2014 BMW CAS models list on mileage correction and key programming, after this table, you can check the corresponding CAS modules.

Digimaster 3: 2000-2014 BMW CAS models(click below to skip their picture)
BMW Car Model	CAS1 912DG128 (3K91D)	CAS2 9S12DG256 (2K79X)	CAS3 9S12DG256 (0L01Y)	CAS3+ 9S12XDP512 (0L15Y)	CAS4 9S12XDP512 (1L15Y) 9S12XEP100 (5M48H)	FEM
BMW 1 Series		2004-2006 (E87)	2007(E87)	2008-2011 (E87)		2012-2014 (F20)
BMW 3 Series		2005-2006 (E90)	2007(E90)	2008-2012 (E90)		2013-2014 （F30/F35）
BMW 5 Series		2004-2006 (E60)	2007(E60)	2008-2010 (E60)	2010-2014 （F07/F10/F11/F18）	Not available yet
BMW 6 Series		2004-2007 (E63/E64)	2008(E63/E64)	2009-2010 (E63/E64)	2011-2013 (F12/F13)	Not available yet
BMW 7 Series	2001-2004 (E65)	2004-2008 (E66)			2009-2013 (F01/F02)	Not available yet
BMW X1 Series				2010-2014 (E84)		Not available yet
BMW X3 Series					2011-2013 (F25）	Not available yet
BMW X5 Series			2007(E70)	2008-2013 (E70)		2014（F15）
BMW X6 Series				2008-2014 (E71)	Not available yet	Not available yet
BMW Z4 Series				2010-2013 (E89)	Not available yet	Not available yet
Remark	Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the board and solder to it and program it. Key programming: Support, via OBD or BDM (wiring)	Mileage Correction: support, process CAS via BDM (wiring), need to remove the dashboard. Key programming: Support, via BDM (wiring)	Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the board and solder to it and program it. Key programming: Support, via OBD or BDM (wiring)	Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the dashboard and solder to it and program it. Key programming: Support, via OBD or BDM (wiring). So far you can only program CAS3+ key via OBD.	Mileage Correction: support, process CAS via BDM (wiring), need to remove the dashboard. Key programming: Support, via BDM (wiring). It supports up to 06/30/2016, after 06/30/2016 it is CAS4+ and it doesn’t support. For the CAS system after 2010, it comes with cpu of 5M48H.	Mileage Correction: support, process via adding FEM filter, one way is to directly add to the FEM module and another way is to add to the back of dashboard. Key programming: Not Support

CAS1 912DG128(3K91D)

cas1-912dg1283k91d

CAS2 9S12DG256(2K79X)

cas2-9s12dg2562k79x

CAS3 9S12DG256(0L01Y)

cas3-9s12dg2560l01y

CAS3+ 9S12XDP512(0L15Y)

For a small part of CAS3+ after 2013, the CPU is OM23S

CAS4 9S12XDP512(1L15Y)

CAS4 9S12XEP100(5M48H)

cas4-9s12xep1005m48h

FEM module

There are two versions of FEM module. X5 is the new version and the filter is connected to the back of dashboard, the manufacturer doesn’t have wiring diagram.

fem-module