2015 Ford Focus add new key by Magic Wand, Quickly & X100 key programmer

New key programming success!! Today, our engineer managed to program a new key of 2015 Ford Focus with Magic Wand transponder, Quickly & OBDSTAR X100 key programmer.

Model:

2015 Ford Focus

Tools used:

The original key and new key

Quickly code reader

Magic Wand

OBDSTAR X100 Key Programming

Procedure:

Step 1- Test the original transponder key by Quickly transponder

Put the original key into the slot in Quickly

Select Read or copy

Wait and don’t remove the key

The chip is 83

Take the key and try to use it start the car

It’s working

Then take out the key

Step 2- Test the new transponder key

(the sane as how to test the original one above)

The chip is 4D 70

Try to start the car by the new key

It doesn’t work

Step 3- Format 4D 70 to 83 by MAGIC WAND transponder

Put the new key into the key reading & writing slot

Press “8” “3” and “write” buttons, and green indicator displays

Take the key away

Step 4- Program the new key via OBDSTAR X100 key programmer

(x300 is connected and starts in preparation)

select Ford-> Focus-> year: 2014-

Select “programming a new key”

Insert a new transponder key and switch ignition on

Magic Wand close to ignition

X300 is reading pin code…

Switch ignition off

Switch ignition on

We own 3 keys to start this car

Programming…

Key information

It will take 4 minutes to program…

Get the pin code

Now, we own 4 key to start this car

Try to start the car by the new key

It’s working

Ford Focus 2015 new key programming success!