About Multi-diag truck FAQ

1.What DAF truck models WAS MULTI-DIAG TRUCKS support diagnosing?

The following models are supported: 65CF

75CF

85CF

95XF

CF65

CF65IV

CF75

CF75IV

F75

F65

F55

F45

CF85

CF85IV

F85

F95

LF45

LF45IV

LF55

LF55IV

XF105

XF95

Beside DAF truck, MULTI-DIAG TRUCKS also support diagnosing more than 60 brand trucks like MERCEDES BENZ, MAN and SCANIA, including 1000 electronic control systems. MULTI-DIAG TRUCKS is the most powerful diagnostic tool for heavy duty and bus; it covers all European trucks, buses and light vehicles. Multi-Diag truck is developed in Europe, the data is absolute accurate

2. What electronic control systems of DAF trucks WAS MULTI-DIAG TRUCKS support diagnosing?

The following systems are supported:

ABS C, Anti lock braking system

ABS D, Anti lock braking system

ABS E, Anti lock braking system

ABS/ASR D, Anti lock braking System

ACH-EA, Auxiliary Heater

As Tronic, Gearbox with electronic control

DIP-4, DAF Instrument Panel

DMCI, Multi-Controller Injection

DTCD, Digital Tachograph

EAS2, Exhaust gases treatment

EBS 2, Electronic Braking System

EBS. Electronic Braking System

ECAS 2 4X2, Electronically Controlled Air suspension

ECAS 4, Electronically Controlled Air Suspension

ECAS-1, Electronically Controlled Air Suspension

ECAS-2 6×2,Electronically Controlled Air Suspension

ECAS-3,Electronically Controlled Air Suspension

ECS-DC3, Engine Control System – DAF Cummins

ECS-DC4, Engine Control S]/Stem – DAF Cummins

EST-32.Retarder

EST-42, Retarder

EST-52, Retarder

Service-2, Maintenance

service, Maintenance

UPEC, Unit Pump Electronically Controlled

Vic, Vehicle central computer

vic-2, Vehicle central computer

VIC-3, Vehicle central computer

3. What function MULTI-DIAG TRUCKS support for DAF trucks?

MULTI-DIAG TRUCKS supported function for DAF trucks: Dignose, Messwearte, Ecu Date, Stellglieder, Steuergerate-Daten, Parameter, Kalibrieren, Rucksetzen, Manueller Prozess

For more details about MULTI-DIAG TRUCKS function list, please check the  column “technical support” or the “Related Download Files”.

Note: Because the truck electronic system updating cycle is a little long, usually it will spend 3 -5 years until the new function is released, therefore, even in 2015 but your truck was manufactured in 2012, our MULTI-DIAG TRUCKS will still work with your car. However, we will keep developing for our users the newer and reliable software with new function.

4. Does MULTI-DIAG TRUCKS Diagnostic tool only diagnose trucks?

No, not only trucks, except trucks, MULTI-DIAG TRUCKS also support light commercial vehicles, special vehicles, tractor, agricultural vehicles, trailer and bus. For more specific supported models, please download from our column “Technical support/service” or under “Related Download Files”.

5. What language WAS MULTI-DIAG TRUCKS is available with?

MULTI-DIAG TRUCKS is available with 17 common languages from more than 180 countries.

Language available:

ENGLISH,

SPANISH

FRANCH

RUSSIAN

ITALIAN

PORTUGUES

GERMAN

DUTCH

SWEDISH

CZECH

CROATIAN

HUNGARIAN

RUMANIAN

SERBIAN

DANISH

FINNISH

POLISH

6. Is MULTI-DIAG TRUCKS only a multi-functional diagnostic tool for truck, bus and engineering vehicles?

No, MULTI-DIAG TRUCKS is not only an original diagnostic tool whose DTCs and data stream is absolute accurate, it is even more like a heavy duty encyclopedia, as Michelle and Alldata, Multi-Diag trucks also contains maintenance information, manual, circuit diagram and device parameters.

7. Can MULTI-DIAG TRUCKS replace NEXIQ USB-LINK In the function?

No, NEXIQ USB-LINK, DGTECH DPA5 and CAT CA2 are all RP1210A/B compatible devices; they are American standard and mainly work with American vehicles. MULTI-DIAG TRUCKS mainly work with the famous European and Russian vehicles, MULTI-DIAG TRUCKS also work with a part of American vehicles.

8, Compared with the other tuck diagnostic tools, what advantages MULTI-DIAG TRUCKS owns?

• Compared with the American OTC Genisys EVO®, which is more powerful in working with American vehicles and OBD protocol vehicles. MULTI-DIAG TRUCKS is more powerful in diagnosing European heavy duty, such as: Germany Mercedes Benz, MAN, DEUTZ, Sweden Volvo, Scania, French Renault and more models.
• WAS MULTI-DIAG TRUCKS is developed by the cooperation of Actia and JALTEST, and MULTI-DIAG TRUCKS hardware is also designed by the same master who also designs JALTEST LINK hardware, but Spanish JALTEST LINK is more attentive to hardware. Besides with best hardware, Actia MULTI-DIAG TRUCKS software is also the best in the world, therefore, it will be amazing to troubleshoot truck trouble with MULTI-DIAG TRUCKS.