Here UOBD2 share you the test report on Lonsdor K518S program new key for Honda CR-V 2015.In this case it is a adding key testing,you need to working key.
Procedures:
Connect Lonsdor K518S to Honda CR-V obd port,then enter menu to select “Immobilization”
Select “Honda”
Select from vehicle
Select “CR-V”
Select “2012-”
Immobilizer
Now we need to check which IMMO type can do this vehicle model,select “Search IMMO type”
Immo type
Now switch ignition ON
Here Lonsdor K518 show you need to use “immobilizer system 2”
Back menu to select “IMMO2”
Add one key
And insert registered key and switch ignition
Switch ignition off in 15 seconds
Use an original key within 17 seconds to switch ignition on
Switch ignition off in 17 seconds
Switch ignition on with a new key in 20 seconds
Switch ignition off in 17 seconds
Switch ignition on within 20 seconds without replace key
Switch ignition off in 15 seconds
Switch ignition on
It will prompt you “Is immobiliser light off?”Press “OK” to continue
Switch ignition off in 15 seconds
Switch ignition on
Now key programming successfully
Keys programmed:3
Check all keys to ensure each can start car engine
Programming complete
Done!
Source:
https://www.chinaobd2.com/wholesale/lonsdor-k518s-key-programmer-full-version.htmlhttps://www.chinaobd2.com/wholesale/lonsdor-k518s-key-programmer-full-version.html