Solution to Nissan consult III error “No registered VI/MI?

Nissan Consult III installation error ” There are no registered VI/MI. Please contact your administrator”. The device is Nissan Consult 3 Renault can clip 2-in-1 diagnostic tool.

nissan-consult-3-installation-guide-001 can clip consult 3-002

Possible reason and solution:

1). Nissan Consult 3 software and Renault can clip software were installed in the same computer. Which caused the conflict.

2). Besides, Nissan Consult 3 should be installed by following the correct instruction, the device must be added to the software.

Nissan Consult 3 software installation procedure:

PASSWORD:nissanconsult3 (for registration)

 nissan-consult-3-installation-guide-02 nissan-consult-3-installation-guide-03 nissan-consult-3-installation-guide-04 nissan-consult-3-installation-guide-05

nissan-consult-3-installation-guide-10

nissan-consult-3-installation-guide-15

Source of Can clip consult 3 2-in-1 diagnostic scanner:

https://www.chinaobd2.com/wholesale/renault-can-clip-and-consult-3-diagnostic-tool.html

  • Scania VCI-3 VCI3 Scanner
  • X-PROG Box V6.12