BMW S1000RR HP4 Race All Key Lost Programming Guide

BMW S1000RR HP4 Race is a sport bike initially made by BMW Motorrad to compete in the 2009 Superbike World Championship, that is now in commercial production.BMW S1000RR HP4 price about $78000,here UOBD2 share the guide on how to program new keys for BMW S1000RR HP4 all key lost programming.

Devices You Need:

KTAG V2.25 EU Online Version

Original TMPro 2 Programmer

Note:Optional BDM Frame for KTAG/KESS V2/Fgtech

Main Procedures:

Step 1:Read Out ECU Data

Locate ECU,it is near the oil tank.And remove it from BMW HP4.

Remove the ECU cover,here is a article about ECU cover removal: How to open EDC16 / EDC17 / MED17 / etc

Then use KTAG adapter and BDM Frame to build connection between BMW S1000RR HP4 and KTAG.

After then,run KTAG software:

Choose P188 protocol,then click read “button” to start reading,it will take you several minutes to finish process.

After reading process completing,you need save the ECU files on your laptop,in the folder you will get below 3 files.

First file:ECU data compressed file

Second file:FLS(Flash data file)

Third file:CPU data file

Note:Different type ECU,you will find difference in files number.

Step 2:Write Start Keys

Run TMPro 2 software,choose BWM 109 protocol,and load FLS file (M58BW016DB file)

TMPro 2 will show you the blank key positions automatically.

Now put a new 7936 chip on the coil of TMPro 2 Transponder

Click “Write Chip”,it will generate a new working chip

After then,you need to use auto key cutting machine to cut a new mechanical key.

Done!