TMPro 2 Program Keyless Continental for VW 93C86

This article show a guide on how to use TMPro 2 to program keyless continental for VW 93C86.And you can use this method to apply on VW Touareg 2009,Phaeton 2010-2011,Bentley 2014,Porsche Cayenne 2009,Audi A8 2009.

Preparations:

TMPro2 Programmer

Soldering Iron

Power Supply Unit

PCF7936 or Silca T14 – JMA TP12 transponder or original remote key

Procedures:

Remote the shell of VAG,Porsche Kessy Continental module

TMPro 2 Program Keyless Continental for VW 93C86 (1)

Then follow below connection diagram to locate the pin position

TMPro 2 Program Keyless Continental for VW 93C86 (2)

Then use the soldering iron to solder the wires as show on the above connection diagram

Connect the VAG,Porsche Kessy Continental module

Connect the TMPro2 to laptop,and run the TMPro software

Click on “Select and Read Memory Device”

Select “93c86(200)” and click OK to continue

Wait for TMPro to load data

You will see the information once the TMPro is done calculating

Now you can create you key.Just put the chosen type of key and press the button.

Then program will finish job automatically.

Done!

  • Scania VCI-3 VCI3 Scanner
  • X-PROG Box V6.12