DRB III emulator to work: wiTECH VCI Pod or wiTech MicroPod 2

wiTECH VCI Pod wins wiTech MicroPod 2 in the built-in DRB III emulator ( which is more stable). wiTech MicroPod 2 is claimed to work fine with the DRB III emulator, but not contained in the package you have to buy your own.

For Programming:

wiTech MicroPod 2 wins in online and offline programming etc.

wiTECH VCI Pod wins in key programming.

DRB III Emulator Download Free for Micropod 2 clone:

Free download DRB III Emulator on Mega:

https://mega.nz/#!1NsDSKYa!L0ZsC5PttRsmYAQhzZR-yK4YQKXAIgwV6ZxwaFEj0t4

118.4 MB

*** Please use the free source at your own risk, no one will take responsibilities for any risk.

For sake of security, you are advised to use the stable one wiTECH VCI Pod with built-in DRB III emulator or buy your own one to work with the cheap wiTech MicroPod 2

What is DRB III emulator?

DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007. The DRB III Emulator software application now runs on your personal computer and interfaces with our custom DRB III+ hardware device to enable all the functions of the original Chrysler DRB III Scan Tool and more. This software package even comes with non-powertrain ECU programming files to enable reflashing everything from BCMs to sliding door modules.

 

How to install DRBIII Emulator?

For using DRBIII Emulator software with tools like VCI pod or Micropod II with witech version 14.xx.xx – 17.xx.xx, it depends on your device (clone or orig / old or newer release) and ONLY AFTER that, install DRBIII Emulator.

 

Here a Micropod II user who are lucky to receive the package with DRBIII Emulator, and he shared his successful experience on how to install DRBIII Emulator.

1: Start with a fresh install of Windows 7 Pro 32-bit.

2: Install all the necessary drivers for your laptop.

3: Set the clock to the current date and time. (It didn’t work when set to 01/01/2017)

4: Connect to WiFi and performed all necessary Windows Updates.

5: Copy the “wiTECH_Install_17.03.01” folder to the desktop.

6: Install the provided version Adobe AIR.

7: Install the provided version of Java.

8: Install wiTECH 17.03.01.

9: After you have finished installed everything, when you get popup messages from Windows Firewall to allow or block any applications, click “Allow”.

10: When you get a popup for AdobeAIR and Java to update, click cancel and do NOT update either AdobeAIR or Java.

11: Open “My Computer” and in the upper left of the window, click on “Organize” and then select “Folder and search options”.

12: Click on the “View” tab and under “Hidden files and folders” select the radio button for “Show hidden files, folders and drives”. Also, uncheck the option for “Hide protected operating system files (Recommended)” and then at the top of the window, click the “Apply to Folders” button.

13: Navigate to “C:\ProgramData\wiTECH\jserver\data\core\stubs” and you will find three installers.

14: Install the DRBIII Emulator stub.

15: Wait for a popup to appear that states the security certificate isn’t valid and click “OK” to allow the software update to proceed. Another popup will appear and the software update will run. After it completes, close the wiTECH window if it opens.

16: Install the Enhanced DRBIII emulator stub.

17: Again, wait for a popup to appear that states the security certificate isn’t valid and click “OK” to allow the software update to proceed. Another popup will appear and the software update will run. After it completes, close the wiTECH window if it opens.

18: Install the K-Line stub.

19: Again, wait for a popup to appear that states the security certificate isn’t valid and click “OK” to allow the software update to proceed. Another popup will appear and the software update will run. After it completes, close the wiTECH window if it opens.

20: Connect the MicroPod2 to the vehicle, then connect it to the computer.

21: A popup window will appear to install software. Click “OK”.

22: After it finishes, start wiTECH 17.03.01 and wait for the screen to show up with the MicroPod2 and IP address of it. You will see a “Launch DRBIII” button in the lower right corner. Ignore it as they do not properly open the emulator.

23: Create a shortcut on the desktop and enter the following into the ‘Path” field.

http://localhost:9876/launchExternalApp?appName=drb_iii_enhanced_emulator&locale=eng_ENG&deviceIp=172.22.22.22

24: Disable the LAN and WLAN network connections and never connect to the internet again.

25: Click on the shortcut and you’re set! The DRBIII emulator will open and give you the choice to select several different vehicles.

More……

VCI Pod + DRB III Emulator Logging and Wireshark dump

https://www.youtube.com/watch?v=wAGrLzq4BK0