(Fixed) BMW F25 X3 connect to ISTA for diagnostics issue

I have a F25 X3 to which I am trying to connect it to ISTA for diagnostics. The ENET cable I know works because it connects to E-SYS just fine for coding.

The ISTA program i have works fine as I use it when connecting to my E90 via a DCAN cable.

So I have changed the setting to ENET as shown here.

I then click on READ OUT VEHICLE DATA and then SETUP CONNECTION

So ISTA does actually find my car as it shows the VIN, etc

But then it struggles to identify the vehicle.

Suggestion:

Have you tried “Ediabas Standard Settings” as Interface? It works fine for me with ENET on my F25.

You must use “Ediabas Standard Settings” with Enet-cable and use Ediabasconfigurator to connect to Enet.

your edibas.ini is messed up.
Try the one attached.

https://mega.nz/#!YUJxxQqa!SRk3GEawfXlCcU8RvMw2tQE93U269Wxwf7EpQhoSB1A

With Ediabas Configurator 2.0 is very easy to create a EDIABAS.INI no matter STD: OBD or ENET.

this works finally.

 Newest BMW Rheingold ISTA-D ISTA-P  Download

www.chinaobd2.com