Xhorse Condor Mini & M4 Clamp Cut House Keys Guide

This article focus on how to use Xhorse Condor Mini and M4 clamp to cut house single and double sided & crucifix keys.

Part 1: Install M4 Clamp

1Clock M4 clamp on the Condor mini.

Please note: Try to put the cutter and probe on top so that they won’t be broken, because the M4 clamp is higher than M1 and M2 clamps.

2 Insert the key.

Firstly turn the handle backwards to release it

Insert key, you can use a sheet to withstand (following image 1)

Turn the handle forwards to fasten it

Or Firstly turn the handle backwards to release it

Insert key, you can use a sheet to help (following image 2)

Turn the handle forwards to fasten it

Part 2: Cut house key

1.Click on “Key copy”.

2.Choose ” universal profile”.

3.Choose the key type.

M4 clamp supports single/double sided & crucifix keys.

4.Will tell you what clamp you can use, then you can understand what is for M1 or M4.

5.Switch to M4 clamp, and choose “Key Learn”.

6.Cut key.

Done.