Free download Pathfinder SDD for jlr Doip Vci clone & original

Free download Pathfinder SDD for jlr Doip Vci clone & original, then followed with DoIP VCI driver installation procedure and ends with JLR DOIP VCI (original or china clone) diagnoses Range Rover L405 2007.

Pathfinder installer free download

http://diagnosticdelivery.jlrext.com/pathfinder/jaguarlandrover_connect_updater.exe

SDD download

http://diagnosticdelivery.jlrext.com/idscentral

Works on original jlr Doip Vci

Image source

Price: $1,248

Also jlr Doip Vci clone (Shown as below):

jlr-doip-vci-sdd-for-jaguar-land-rover-xp

Image source

Price: $599

Almost its flash data same sdd, but you dont need install it because 2017-2018 jlr cars still under dealer warranty……..

Question:

After installing the jaguar land rover connect, the program then try to download the file pathfinder through the updater, which i think is a big file more than 10gb that can not be pause. after system restart the program will start download from beginning. so if i can get a direct link to the Parthfinder software i can use download manager to download it. and again do you know the size of the file.

Answer:

There are no any direct links. You install minimal version that I give and then it give all updates online. There are no any other installers.
And, as pointed above, you must have JLR DoIP to work with Pathfinder

Question: Does sdd support for freelander td4 2005MY Landrover?

Answer: SDD can diag 2005-2016 land rover

SDD 153 extended license depend how many years u want !!!

Part 2: How to install Pathfinder & SDD?

A.Click the”技术支持”，then choose the “driver download”（Chinese word seems like “JLR DoIP VCI驱动下载”）You can follow the picture below.

By the way, the password for the driver downlosd: g0f0

B.Please pay more attention to the version of the DoIP VCI driver, it always should be the latest version. So the best you should update the driver without delay.

jlr doip install-01

The connection of DOIPVCI

A.Connect with USB;(It’s easy for you.)

B.Connect with WIFI; (You can choose the Wifi which named “DoIP-VCI-11D4”, and the last four numbers are random.)

jlr doip install-02

The Connection between the DoIPVCI and computer

Following the picture below, open the VCI Manager and click the “connect”（Chinese word seems like “连接”）

jlr doip install-03

D.Check the connection status with the computer.

Refer to the figure below, when it shows a green check mark, run is ok.

jlr doip install-04

Update of DoIP VCI’ firmware.

Open “VCImanager”;

Then click the “VCI Update”（Chinese word seems like “VCI更新”）;

Click the “start”（Chinese word seems like “开始更新”）and you can get the update progress on the right;

TIPS:

Pay more attention! ! ! When you click the “start”, it cannot be interrupted or stopped. Otherwise the DoIP VCI will be damaged. You can disconnect when it finished.

jlr doip install-05

F.SDD can get the hardware directly, it’s perfect if the icon is green.

PathFinder need to set the network interface.

Click “cancel”（Chinese word seems like “取消”）;

It doesn’t connect successfully if it shows “SIM””SimFiles”, you should change them into “JLR-JLR-DoIP, D-PDU API by Bosch””86004905”. Now you can use it for diagnosis.

jlr doip install-06 jlr doip install-07 jlr doip install-08