How to Upgrade Lonsdor K518 KPROG2 Adapter Kernel

After the APK of Lonsdor K518 device is upgraded to V1.6.0 version, the adaptor requires to be installed new kernel beforehand. So,here comes guide on how to upgrade Lonsdor KPPROG2 adaptor Kernel, please refer to below operations.

KPROG2 Adapter for Lonsdor K518ISE Key Programmer

Reliable source: https://www.chinaobd2.com/wholesale/kprog-adapter-for-lonsdor-k518-key-programmer.html

Used to program MCU and EEPROM on ECU circuit board.

Procedures:

Step 1: Connect the device to the specified adaptor and plug in 12V power, as shown below.

Step 2 : Start up the device, and input password to enter home screen. Click “Update firmware” button in below red box.

Step 3: The following interface appears, click “Install Adaptor” in below red box.

Step 4: It skips to the below interface, click “OK” to continue.

Step 5: It skips to below interface. You will see the progress indicator moving rightwards. When downloading is completed, click OK” and exit. The adaptor kernel is installed successfully.

Src:https://www.chinaobd2.com/wholesale/lonsdor-k518ise-key-programmer.html