DTS-Monaco and Vediamo, which better?

DTS-monaco and Vediamo are added to SDconnect C4 software since 12-2017.

DTS-Monaco-Windows-7-download-1

but what is DTS-monaco and what is Vediamo? And what\s the difference?

 

Look here:

DTS-Monaco-Windows-7-download-4

What is DTS-monaco:

DTS Monaco is universal Engineering Tester for Diagnostic and Control Functions of Vehicle

ECUs. The name Monaco is derived from Modular Analyzer for Vehicle Communication.

DTS Monaco comprehensively covers all tasks in the areas of engineering, testing and

preparation of manufacturing tests:

  • diagnostics
  • analysis
  • OBD
  • flash programming
  • measuring
  • parameterizing
  • residual bus simulation
  • OTX

DTS Monaco is based on standards such as ODX, OTX and UDS

 Vediamo-download

What is Vediamo:

Vediamo Software is used by the plant engineers to develop diagnosis and engineering software, which is now used by Xentry and DAS, is based on the Mercedes Benz super engineering version developed and delivered to the general customer service dealers’ use.

The use of MB super engineering version has no limitation in diagnosis / modification / programming function are open which cannot be through the VEDOC (the original application code changes with flow) can be free to increase or decrease the SA code, modify the objective, for example: the increase of vehicles equipped with SA500 electric folding mirrors, commonly known as the Xentry and DAS development mode: open data project version in 2010 after the release, increase the number of functional limitations. So we will meet the vehicle version is too new to be into the control unit in use, or are unable to do any special modifications to the control unit.

For example: W204/2122012 instrument to modify the area family configuration, or open other resource advantage function. Diagnosis / Mercedes super engineering version of the code with code / modification / programming database using the Xentry database, so the Mercedes Benz super engineering version is determined with the Xentry version, as long as the database is new and can be used in new models.

Whats the difference of DTS-monaco and Vediamo:

DTS-monaco-vs-Vediamo

DTS-monaco vs. Vediamo
Functions DTS-monaco Vediamo
All cars have one key code access Yes No
Vehicle control unit software,

One key storage

Yes No
Car fault codes reading Yes No
Data exchange Yes No
Quick test Yes No
Single control unit keys off-set code Yes No
Offline programming Yes Yes
Increase reduced SA codes Yes Yes
Personalize the control unit parameters Yes Yes

In summary, DTS-monaco wins!

  • Scania VCI-3 VCI3 Scanner
  • X-PROG Box V6.12