Autel MS908P Reset Airbag Warning Light for Porsche 911(991)

This a mini guide on how to use Autel MS908 Pro to reset airbag light for Porsche 911(991).And I will put the video guide at end of article.

Porsche Airbag Light Resetting by Autel MS908P Operations:

Step 1:Connect Autel MS908P to vehicle,and power on the device.

Then enter the menu to select vehicle model:

Diagnostic–>Porsche–>Manual selection–>911(991)

Select “Diagnosis”

Select “Control unit”

Select “Airbag”

Diagnostic system initializing…wait a minute

Select “Read codes”

There are two DTCs exist:

00204:Driver buckle-open circuit

000404:Thorax airbag driver’s side,limit value exceeded.

Then click “ESC” to exit,and selcect “Erase codes”

Establishing vehicle communication…

It prompt you to make sure turn the ignition to “ON” position,but do not start the engine.

Select “Yes”

DTCs and freeze data will be deleted.

Are you sure you want to continue

Select “Yes”

Erasing…

Code have benn successfully erased.

Return to the function menu and tap ‘Read codes’ to verify

Select “OK”

Wait for seconds,the airbag warning light disappeared.

Autel MS908P Reset Airbag Warning Light for Porsche 911(991) Video Guide: