Audi S5 2013 ECU Diagnosing by OBDSTAR X100 Pro

Here is one of example of the use of OBDSTAR hand-held device X100 PRO on 2013 AUDI S5.

 

Tool used:

OBDSTAR X100 pro

Procedure of X100 PRO diagnosis on audi s5:

Connect X100 to S5

Start the engine

Select the menu:

OBDII-> OBDII->

Loading mcu.bin…

Launching…

Connecting…

Reading data…

Select AUTO SCAN->Read Codes->Stored Codes

No codes are stored in the module.

Back to the diagnostic menu, go to Live Data

Number of DTCs

Engine coolant

Long term fuel trim

Intake manifold absolute pressure

Engine RPM

Vehicle speed sensor

Ignition timing advance for #1 cylinder

Intake air temperature

Absolute throttle position

Commanded secondary air status

Oxygen sensor input voltage b1s2

Short term fuel trim b1s2

Oxygen sensor output voltage b2s2

Short term fuel trim b2s2

OBD requirement to which vehicle or engine is certified

Time since engine start

Distance traveled while MIL is activated

Fuel rail pressure

Commanded evaporative purge

Number of warm-ups since DTCs cleared

Distance traveled since DTCs cleared

Barometric pressure

Equivalence ratio (b1-s1)

Oxygen sensor current (b1-s1)

Equivalence ratio (b2-s1)

Oxygen sensor current (b2-s1)

Catalyst temperature bank 1, sensor 1

Catalyst temperature bank 2, sensor 1

Control module voltage

Absolute load value

Fuel/ air commanded

Equivalence ratio

Ambient air temperature

Absolute throttle position b

Absolute throttle position c

Absolute throttle position d

Absolute throttle position e

14