Audi A6L 2013 5th immo add key using Xtool x100 pad2 with KC100 adapter

Have Audi A6L 2013 with 5th immo to add new keys, highly recommend Xtool x100 pad2 with KC100 adapter. Seeing is believing, read the step-by-step procedure in the following paragraphs.

Read me: www.xtooltech.com marked in this video is the official site of Xtool x100 pad2. www.chinaobd2.com is a trustworthy shop I bought and will buy Xtool x100 pad2 2. If you have trouble to watch the video, please go on reading the step-by-step procedure as below: Tap "X100 pad2" on the screen. Tap "VW/Audi Skoda / Seat" 图3 Tap "4th/5th immobilizer system". 图4 You will have 2 options "4th immobilizer system" and "5th immobilizer system", Audi A6L 2013 is 5th immobilizer system. 图5 pad2 can't identify the VIN code because the ignition doesn't turn on, go to switch the ignition on. 图6 Come to 5th immobilizer system function menu. 图7 1). Read immokey. 图8 9 10 2). Show security data Have 3 keys. 图11 3) Make dealer key. Please plug the KC100 into tablet, press (OK) to continue. The KC100 adapter indicator turn blue means it powers on. 图12 13 14 Put the original key into the coil of KC100 adapter. 图15 Then put the blank key that ready to add to the coil of KC100 adapter 16 Writting key... Create dealer key success. 17 4) Learn the key. Turn the ignition on, click "OK". Read the note shown as below. 图18 Input the number of keys to match 19 Put the blank key to the sensor area. 20 The first one learn successfully. 21 Then put the second one to learn, after learn with success, it prompts "Learning success" 22 Finish match the key. 23 Tap "Return" button to exit the system. To identify the two keys are working or not. They are working fine. 24 Now I take one key outside of the car and leave one key in the car. Start the engine. the first key can turn on. 25. Take the first one outside of the car, and another one in the car, start the engine, the key start turn on ok. The remote is working. Done! The truth: Xtool x100 pad2 with KC100 adapter is tested able to add new keys for Audi A6L 2013 with 5th immo. " width="1036" height="582" />

The first one key is original and the remote is working, the second one is blank to be programmed.

1. I complete a Youtube video, attach here:

Read me:

www.xtooltech.com marked in this video is the official site of Xtool x100 pad2.

www.chinaobd2.com is a trustworthy shop I bought and will buy Xtool x100 pad2

2. If you have trouble to watch the video, please go on reading the step-by-step procedure as below:

Tap “X100 pad2” on the screen.

Tap “VW/Audi Skoda / Seat”

Tap “4th/5th immobilizer system”.

You will have 2 options “4th immobilizer system” and “5th immobilizer system”, Audi A6L 2013 is 5th immobilizer system.

pad2 can’t identify the VIN code because the ignition doesn’t turn on, go to switch the ignition on.

Come to 5th immobilizer system function menu.

1). Read immokey.

 

2). Show security data

Have 3 keys.

3) Make dealer key.

Please plug the KC100 into tablet, press (OK) to continue.

The KC100 adapter indicator turn blue means it powers on.

Put the original key into the coil of KC100 adapter.

Then put the blank key that ready to add to the coil of KC100 adapter

Writting key…

Create dealer key success.

4) Learn the key.

Turn the ignition on, click “OK”.

Read the note shown as below.

Input the number of keys to match

Put the blank key to the sensor area.

The first one learn successfully.

Then put the second one to learn, after learn with success, it prompts “Learning success”

Finish match the key.

Tap “Return” button to exit the system.

To identify the two keys are working or not.

They are working fine.

Now I take one key outside of the car and leave one key in the car.

Start the engine. the first key can turn on.

Take the first one outside of the car, and another one in the car, start the engine, the key start turn on ok.

The remote is working.

Done!

The truth: Xtool x100 pad2 with KC100 adapter is tested able to add new keys for Audi A6L 2013 with 5th immo.