OBDSTAR X300 DP+ RFID Adapter program key VW 4th 5th IMMO OK

Good news for sharing:

Now you can read immobilizer and program key for VAG 4th& 5th IMMO by OBDSTAR X300 DP and new OBDSTAR RFID Adapter!

Tested 2013 VW Passat key NEC+24C64 VW 4th IMMO OK!

How to connect OBDSTAR X300 DP Bluetooth VCI Box with RFID Adapter?

Connect diagram

Use the cable come with OBDSTAR RFID Adapter → Connect OBDSTAR X300 DP Bluetooth VCI Box with one end → Connect OBDSTAR RFID Adapter with the other end →Connect OBDSTAR X300 DP with car OBD2 port

After connect OK, both the Bluetooth VCI box and OBDSTAR RFID Adapter blue LED indicator will be on.

OBDSTAR X300 DP + RFID Adapter program VW 4th IMMO 5th IMMO key steps

Power on OBDSTAR X300 DP Pad

→ Choose “IMMOBILIZER”

→ Select “VW/AUDI/SKODA/SEAT”

→”VW/AUDI/SKODA/SEAT V32.03″

→ “VW”

→ “Program keys”

→ “Generation IMMO”

→ “Write meter” (According to dashboard meter color)

First go to “Read EEPROM”.

Follow the tips:

Use the original working key to turn ignition on. If it’s a smart key, turn off ignition and turn it on again.

Make sure the dashboard is black without any lights on.

Click “OK” to continue.

Enter the file name to save.

OBDSTAR X300 DP read EEPROM for VW Passat 4th IMMO OK!

Show “Finish”.

Next go to “Read IMMO data”.

Follow the tips:

Turn ignition on. If it’s a smart key, turn off ignition and turn it on again.

Make sure the dashboard is black without any lights on.

Click “OK” to continue and wait IMMO reading complete 100%.

OBDSTAR X300 DP read IMMO data for VW Passat 4th IMMO OK!

Show car VIN, CS, PIN Code and programmed key information.

Then go to “Make ordinary dealer key”.

Follow the tips:

Turn ignition on. If it’s a smart key, turn off ignition and turn it on again.

Make sure the dashboard is black without any lights on.

And insert the new key into OBDSTAR RFID Adapter transponder area.

Now OBDSTAR X300 DP Pad program 2013VW Passat key with NEC+24C64 VAG 4th IMMO successfully!

Last go to “Program keys”.

Enter the key quantity as 2. (1 original working key+ 1 new key)

Turn ignition on and make sure the dashboard is in black status.

Follow the instruction and turn on car ignition using the new key.

Key learning is done! New key is working!