Xhorse Condor XC-MINI V4.0.1 (06.16) update and procedure

Here provide Xhorse Condor XC-MINI V4.0.1 features, update link and procedure.

Xhorse Condor XC-MINI V4.0.1 (2017.06.16) features:

——————————————

+Add universal key decode function

+Add M2-D function

+Add motor sensor testing function

*Modify probe/cutter detection

*Fix machine may crash error problem

*Fix HU49 key decode error

*Fix HU66 cutting speed issue

*Fix BW6 cutting error

*Fix TBE1 cutting error

Notes:

1.New update for both SN KM02/KM03 machines

2.New function: Main Interface-Key Duplication-Universal Type

3.Universal Type support decode/cutting parts of home & vehicle keys

4.Please keep the whole key clean and conductivity good(ensure without dust/oil)

5.For one side key(thickness of whole key usually 1.5mm or 2.00mm) please add a shimsiness card under the key, ensure the whole key thickness should more than 3mm

Condor XC-MINI V4.0.1 update download:

https://mega.nz/#!LghkGQoT!nhs6ucmeVwPj5sov3iI5WK2pVsuTe1PziwASvMbOYtI

(No pass, safe, working)

Condor XC-MINI V4.0.1 update procedure:

1. Connect Xhorse Condor XC-MINI host to the PC with a USB cable.
2. Turn on Condor XC-MINI.
3. Click “Update online” button to start update.
4. The screen will appear “Updating” Prompt.
5. Wait for the update completed.

Notes:

Do not turn off PC or unplug USB cable during updating.

Data downloaing and firmware upgrading may take a while, please be patient.

If the update fails,turn off anti-virus software and then try again.