Products

NEW Full Adaptors for All UPA USB Programmer,1.it can be available for almost UPA Programmer.2.Supported language: English

MC68HC11 Programmer communication with PC via serial port , it is easy to use Windows 98/ME/XP software In-circuit/On-board.

This is the only way for the correction of MB CAN Filter 8 in 1 for W221 W204 W212 W166 and X166 W172 W218 W246 new models.Compatible Vehicle:W221, W204 ,W212 ,W166, X166, W172, W218, W246

Plug and Drive EcoOBD2 Economy Chip Tuning Box for Diesel Cars 15% Fuel Save1.Save 15% Fuel consumption, with 2 years warranty2.EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.

New V2.10 KTAG K-TAG ECU Programming tool Master Version Hardware V5.001

1.Filter the km synchronization command between the cluster and the EZS module .2.This is the only way for the correction of MB CAN Filter 8 in 1 for W164 /X164/W245/W251/W171/G55/W219/W211 new models.3.Compatible Vehicle:W164 ,X164,W245,W251,W171,G55,W219,W211

VDSA-HD ECU is a special tool for flashing ECU. 1.supports Read fault code, erase fault code, read live data, read ECU information, Read ECU Data, Write ECU Data, ECU Calibration.2. It covers Weichai, Xichai, Yuchai, Chaochai and Renault, Denso and so on .

Professional Intelligent Programming Charger ZLP100A 1.used for charging or protectively charging conventional lead-acid batteries, 2.lead-calcium/silver batteries, sealed (AGE, MF) and GEL batteries without disconnecting power supply.

The TOP3100 programmer 1.has compact size, lowe power comsuption, high reliability.2.This is an universal equipment especially designed for MCU and EPROMs programming.

1.Auto Meter Microcontroller Programmer for chinese cars2.Support online update3.Support read and write without remove and soldering

This VP598 is upgrade version of VP390 Wellon programmerCovers all function of VP390 and support even more.Support online update.

This is newest version of XPROG-M ECU Programmer, XPROG-M V5.5.5 is the only tool can decryption BMW CAS4., Hard disk. Software is preinstalled, you can directly use when you receive the package.

M35080V6 EEPROM Eraser Programmer was been used to read, program, erase Incremental Registers\EEPROM. It is easy to use windows XP/2000/98 software.

XPROG -M V5.3 Software With Dongle

1.can be also considered as a MCU version of the software TMS-374 Decoder ECU. 2.The only difference between the two tools is that the MCU version works without a PC.3.TMS374 ECU decoder is a frequency sweeper with 5V square wave output (Duty cycle 50%, effective frequency range from over 10kHz (max 50kHz) to 50Hz) .

Online Version Kess V2 Firmware V5.017 support online service, can work with internet, no tokens need, newly add 140+ protocols program safer and more stable!

Full Set 21pcs Socket Adapters for Super Mini Pro TL866A EEPROM Programmer

Audi VW micronas/Fujitsu programmer 2.0 replace the R200 and R250 fully functionSupported Languages: English, Deutsch, Italian, Portuguese, Russian, Czech

Top 4 reasons to get V2.23 KTAG Main Unit1.Latest hardware version V7.0202.Available Protocols for K-TAG: BDM MOTOROLA MPC5xx3.Operation convenient, automatically recognize ECU model, high stability.4.Can save your money to get the latest KTAG ECU Programming Tool

The modern interface that allows read and write memory from the car computer via the diagnostic connector.Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more ...