Mileage Programmer

This product can be used to odometer correction, read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat, VW ,VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia cars

1. Original SmelecomUSA PROG Full package is the best odometer correction tool for USA cars. 2. Hand-held one, very easy to use; 3. with usb 2.0 port to update software or download/upload data; USA adapter, CMM adapter,OBD cables are in package. Including VW/AUDI 2007+

Software version V4.94.With the use of the new Digiprog III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed. This one has best price offer.ST59 Plug works together with DIGIPROG3, used on vehicles with NEC chips, like Ford, Renault and so on.

Digimaster 18 is a programming machine with multifunction which can connect computer through the USB access. Apart from the ordinary functions, there are special models function.

Ford OBD2 Tool is a newly released lightweight and friendly OBD device. It is used to mainly perform Ford instrument calibration and immobilizer key matching.

The TMS370 is mainly used for car radio decoding, car odometer adjusting and IMMO Pin code reading.

USA PROG STANDARD PACKAGE is a odometer correction tool for almost all USA cars. Hand-held one, very easy to use; with usb 2.0 port to update software or download/upload data; USA adapter, CMM adapter,OBD cables are in package.

1.CAS BDM Programmer works together with Digimaster 3, CKM100 or CKM200.2.used to read and program BMW CAS 1/2/3/3+/4, and BENZ series EIS CPU data.

VW AUDI KM Tool V2.5 is a KM adjust tool,1.it works with VW cars models such as Golf 5 Passat EOS Caddy Tiguan and Touran; 2.works for AUDI A3 A8 R8 and TT. VW AUDI KM Tool V2.5 is multi-language options.

Software version V4.94.With the use of the new Digiprog III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed.

Yanhua Digimaster 3 also is called Digimaster III with 980 Tokens or shortly D3 is new developed odometer correction master. It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz & BMW etc.

BMW CAS4 CAN-filter is a special module allows to adjust mileage readings in BMW F01, F07, F10 and X3 2011-2012 (with motorola processor 9S12 XEP mask 5M48H / 4M48H – SC 66 7095 CAG).

If you buy the digimaster III from us in the beginning of 2012 or last year, and if you want to do newer and more cars, you need to buy this tokens to Update your digimaster 3, then you can use it. You can use it on Digimaster 3, CKM100, CKM200, ADM-300A.

1.The Tacho Pro software might not work on PC`s that are faster than 233 MHZ. 2.Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside. 3.Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell

CAS3/912X/9S12X IN CIRCUIT PROGRAMMER, 1.you don't need to remove the micro from the board.You only connect 7 pins will be ok.2.It connect to PC by USB.3.Support MC912D60 MC912DX128 MC9S12DX64 MC9S12DX128 MC9S12DX256 MC9S12XDX512

This device is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen,Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car’s computer or correct the odometer reading.

Tacho Universal V2008.01 Update& Repair Kit 1.can repair the following troubles: Screen display: Diga update and RESET, 2.No display after powered on, No vehicle list, screen display black strip, Frequently Halting. 3.Screen display both the following: update handheld and the machine cannot read EEPROM.

KM Program TOOL via OBD2 For FIAT

KM Tool For Ford CAN BUS package includes: OBDII Device, sense dongle, software.New Ford KM Tool function include:Read KM from car,Write new KM into car. Fix normal connection bug.

VAG Tacho USB v5.0 support VDO with 24C32 or 24C64,our vagtacho usb version 5.0 includes the functions of vagtacho usb 4.52 , vagtacho usb 4.0, and vagtacho usb 3.5 VAG Kombiinstrument / Immo box eeprom programmer!