Opcom 2014V Can OBD2 For Opel Firmware V1.59 PC Based Opel Diagnostic Tool CAN-BUS Diagnostic with PIC18F458 Chip Support Firmware Update


Opcom OP-Com 2014V Can OBD2 for Opel Firmware V1.59
Top 5 Reasons to Get OPCOM:
1. Software Version: 2014V
Hardware Version: 1.59
2. OP-COM - PC Based Opel Diagnostic Tool
3. Language: English
4. Opcom 2014V Software Free Download
5. With PIC18F458 Chip Support Firmware Update
Note: Never Update It Online, It Will Damage The OP-COM ! There is no need to active the software, can be used directly
Attention for Latest Opcom Software VAUX-COM_120309a.exe:
1. If you run it on XP or Win7, please make sure you install dotnetfx35_SP1 system cookie, or Opcom software can't perform well
2. When you install on Win7, please open laptop via administration, and read the installation video on CD carefully

OPCOM 2014V Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
OPCOM 2014V Feature:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package List:
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD

OP-Com 2014V Software:

Opcom OP-Com 2010 V Can OBD2 for OPEL Firmware Software  Display 1

Opcom OP-Com 2010 V Can OBD2 for OPEL Firmware Software  Display 2


Opcom OP-Com 2010 V Can OBD2 for OPEL Firmware Software  Display 3

Opcom OP-Com 2010 V Can OBD2 for OPEL Firmware Software  Display 4

Opcom OP-Com 2010 V Can OBD2 for OPEL Firmware Software  Display 5

Opcom OP-Com 2010 V Can OBD2 for OPEL Firmware Software  Display 6

more infomation about Opcom 2014V Can OBD2 For Opel Firmware V1.59 PC Based Opel Diagnostic Tool CAN-BUS Diagnostic with PIC18F458 Chip Support Firmware Update please go to https://www.chinaobd2.com

Prev: Low Cost 2014D Vida Dice Diagnostic Tool for Volvo
Next: VPECKER E4 Phone Bluetooth Full System OBDII Scan Tool for Android Support ABS Bleeding/Battery/DPF/EPB/Injector/Oil Reset/TPMS
  • Scania VCI-3 VCI3 Scanner
  • X-PROG Box V6.12
Popular Post